Highland City sits right between Lakeland and Bartow, and most people here commute in one direction or the other. That means the house sits closed up and empty through the hottest part of the day, then has to catch up the moment everyone gets home.
A heat pump that is starting to weaken will handle the steady load fine and fail during that evening catch up. Egberts Electrical Plumbing Air Conditioning repairs heat pumps throughout Highland City, including the subdivisions off County Line Road and the older properties closer to Highway 98.
Evening is when most homeowners here realize something is off. These are the signs that matter.
If the system cannot recover in the evening, something has already slipped and will keep getting worse.
Much of the housing stock here went up between the late 1980s and the 2000s, and the original equipment has either been replaced once or is badly overdue. Second generation systems installed a decade ago are now the ones failing most often.
The daily temperature swing is harder on equipment than people realize. A thermostat setback of eight or ten degrees means the system starts every afternoon under a heavy load, and that repeated hard start is what kills capacitors and contactors early.
Add in Polk County lightning and the constant humidity, and you have the three things that drive nearly every call we take out here. Surge damage, worn starting components, and blocked condensate lines account for a large share of the repairs we perform.
We start by confirming what the system is actually doing rather than what it should be doing. That means watching a full startup, measuring amp draw at the compressor, and checking whether the unit is pulling in enough air at the coil.
Diagnosis continues at the air handler with airflow, drain, and electrical checks, and at the thermostat to rule out a wiring or programming issue. Only then do we give you a cause, and it is always something we can show you rather than just describe.
The repair itself happens once you approve the price. We stock the parts that fail most often, finish the same day in the majority of cases, and leave you with a system that completes a full cooling cycle while we watch.
Brian got home from work on a Tuesday in August to a house sitting at eighty six degrees and a heat pump that was humming outside without the fan turning. He shut it down and called us before dinner.
The run capacitor had bulged and failed, which is one of the most common August repairs we make. Our technician replaced it, tested amp draw on the compressor and fan, rinsed the coil, and confirmed the temperature split at the vents. The house was comfortable again well before bedtime.
Here is what you are getting when our truck pulls into your driveway.
When a system quits at ten at night, you need someone who answers, and that is why we offer emergency service every day of the year.
Coming back from a big thermostat setback forces the system to work under its heaviest load. A weak component shows up during that recovery.
A smaller setback of a few degrees is usually easier on the equipment than a large one in this climate.
Capacitor replacement is at the top of the list, followed by contactors and clogged condensate drains.
A compressor that hums but will not start, or trips the breaker repeatedly, needs testing right away before more damage occurs.
Yes. Emergency service is available for Highland City homeowners whenever a system goes out.
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
You can find more information in our Cookie Policy and .