#1 Heat Pump Installation in Lakeland, FL
The team at Egbert’s Cooling and Heating offers affordable heat pump installation in Lakeland, FL, and surrounding areas. Why do heat pumps remain one of the most popular types of HVAC systems for modern homes in Florida’s mild climate?
These nifty installations boast efficient heating and cooling, as well as an impressively long useful life.
Are you thinking about upgrading to a heat pump? You’ll need expert installation from a company like Egbert’s Cooling and Heating.
Find out more about our services below, or call us to see why we consistently exceed our Lakeland customers’ expectations.
Contact us
Fill out the form below and a member of our team will reach out to you as soon as possible.
What Is a Heat Pump?
A heat pump works through a series of pumps and piping to move heat from one location to another. Unlike traditional split HVAC systems, heat pumps do not use fuel or electricity to produce heat. Instead, they redirect heat for great cooling and heating options year-round.
These characteristics make heat pumps highly efficient and considerably less expensive to run. Property owners also forgo the need to install separate units.
Type of Heat Pumps
Modern homes use three major types of heat pumps, differing by the heat source they use.
An air source heat pump extracts heat from the outside air and moves it into the room. Air source pumps are the most common type because they are cheap and easy to install. They also need relatively little space compared to a two-unit split HVAC system.
Air course pumps function best in mild-to-moderate climates like Florida that do not see extreme temperature fluctuations throughout the year. These systems are less efficient in areas with colder or hotter temperatures than average.
Ground source heat pumps, or geothermal heat pumps, extract radiant heat from the ground around your home. The ground temperature is usually higher than the ambient air temperature, making ground source pumps more efficient than other types during the winter. In fact, The Department of Energy estimates that a geothermal heat pump can cut energy usage by as much as 60%!
The main downside of geothermal pumps is the initial cost. Ground source pumps require extensive piping, so installation costs are high.
Water source heat pumps, as the name implies, extract heat from nearby water reservoirs. Water has a high specific heat, meaning it is adept at storing thermal energy. So, water source pumps tap into this energy and use it to heat homes.
Water source pumps are as efficient as ground source pumps but only cost about as much to install as air course pumps. The main drawback is the need for a suitable source of water nearby, such as a pond or river.
In addition to the three types above, hybrid heat pumps combine elements of air and ground heat pumps. It creates a system that runs efficiently in most climates and temperatures.
Parts of a Heat Pump
All types of heat pumps contain the six following components.
Indoor unit. The indoor unit, or air handler, contains the coil and a fan. The fan blows air over the coil depending on whether the system is in heating or cooling mode.
- Outdoor unit. The outdoor unit contains a coil and fan that moves air based on the system setting.
- Refrigerant. Pumps move refrigerant fluid through the coils to absorb heat from the air.
- Compressor. The compressor pressurizes the refrigerant from a vapor into liquid.
- Reversing valve. The reversing valve switches the flow of coolant fluid, allowing the system to change between heating and cooling for that time of year.
- Expansion valve. The expansion valve controls refrigerant fluid. It adjusts system pressure to optimize performance and prevents damage from over-pressurization.
What Does Heat Pump Installation Cost?
Reliability is still the top reason that heat pumps have become so popular in recent years. But what will a heat pump installation cost in and around Lakeland, FL? The range is difficult to pin down as it depends on your choice of pump, location, and several other factors influencing heat pump installation in Lakeland, FL.
Would you like to compare quotes or get more information? Feel free to chat with the team at Egbert’s Cooling and Heating about your needs and budget. There is sure to be a new HVAC system or heat pump out there that will match your requirements.
Benefits of Heat Pumps in Lakeland, Florida
Since heat pumps do not use gas or electricity to produce heat, they use less fuel than other types of AC systems. Switching to a heat pump can save the typical homeowner a significant amount on annual heating and cooling costs.
Heat pumps have relatively few moving parts, so you don’t have to worry about damage from combustion or electrical heating. They also offer relatively low maintenance requirements. You will only need to schedule a professional like Egbert’s Cooling and Heating for heat pump maintenance about once every three years.
Heat pumps have an extremely efficient conversion rate of energy to heat. They do not produce carbon emissions from electricity or gasoline either. Installing a heat pump will improve your environmental footprint and reduce your carbon emissions throughout the year.
Versatile heat pumps perform both heating and cooling functions since every unit contains a reversing valve to switch the flow of coolant. The heat pump will move heat inside during the winter and take it out outside in summer. Unlike split HVAC systems, pumps combine heating and cooling into a single HVAC unit.
Heat pumps are extremely durable and can easily last up to 15 years. Some heat pumps even make it to 50 years with regular maintenance and repair.
Top-notch Heat Pump Installers Near Me in Lakeland, FL
We have proudly served the Lakeland community for years. Our team has the expertise and training to handle any HVAC job you send our way.
Contact Egbert’s Cooling and Heating online or call 863-224-2811 today for reliable heat pump installation in Lakeland, FL.